MRP Motorsport Community
MRP Home Birel America Go Rotax KartingBiz Register FAQ Members List Social Groups Calendar Search Today's Posts Mark Forums Read

Go Back   MRP Motorsport Community > Technical Support Forums & Discussion > Baseline Set-Ups for Birel & Monza

Reply
 
Thread Tools Display Modes
Old 03-02-2010, 09:20 AM   #1
RobertsRacing45
Rookie
 
Join Date: Mar 2010
Posts: 2
Default R30CY with 50mm axle

I have ordered a new R30CY and was wondering if I could get the baseline setup for it? I saw the baseline setup for the R30CY w/ a 40mm axle but not the 50mm axle. I will be running the Tag Sr class at 350lbs on YKC's. Thanks in advance!

Matthew
RobertsRacing45 is offline   Reply With Quote
Old 03-02-2010, 09:50 AM   #2
Chris Lobaugh
Birel Specialist / Engineer
 
Join Date: Jan 2008
Posts: 237
Default

1040x50x2-F, middle bearing tight, 100mm hubs at 54 1/2" wide, one seat stay each side, front bar in, spindles in the middle, 75mm front hubs set two thick and one thin spacer wide, 2mm toe out, camber will be between 0 and 2mm positive. Freeline seat mounted at 60cm from the front rail to the front edge of the seat, top of the axle to the top of the back of the seat 22cm, bottom of the seat should be 3-5mm below the frame rails...hope this helps
__________________
Chris Lobaugh
Birel Engineer & Specialist
chris@mrpmotorsport.com
Chris Lobaugh is offline   Reply With Quote
Old 03-02-2010, 11:14 AM   #3
RobertsRacing45
Rookie
 
Join Date: Mar 2010
Posts: 2
Default

Thank you Chris!
RobertsRacing45 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:34 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2008 - MRP Motorsport - All rights reserved