MRP Motorsport Community
MRP Home Birel America Go Rotax KartingBiz Register FAQ Members List Social Groups Calendar Search Today's Posts Mark Forums Read

Go Back   MRP Motorsport Community > Technical Support Forums & Discussion > Baseline Set-Ups for Birel & Monza

Reply
 
Thread Tools Display Modes
Old 10-29-2010, 12:25 PM   #1
rotaxmax
Rookie
 
Join Date: Oct 2010
Posts: 1
Default suggestions for CR32 at PBIR

I will be running a CR32SP with a 125cc TAG Parilla Leopard engine at the kart track at PBIR. Any suggestions for set up are appreciated. Thanks.
rotaxmax is offline   Reply With Quote
Old 10-31-2010, 06:27 AM   #2
Marc Miller
Birel & Rotax Specialist
 
Join Date: Jan 2008
Posts: 850
Default

I would use this set-up for the most part (click on R32 thread). Front width will likely be 2-bars and dial as much front brake out as you can stand. Several corners at PBIR you can trail-brake into and too much front brake will make the kart want to push or buck.

http://www.mrpmotorsport.com/communi...ead.php?t=1831
__________________
Marc Miller
Director of Brand Development
MRP Motorsport/Birel
Marc Miller is offline   Reply With Quote
Old 11-11-2010, 01:11 PM   #3
mhershorn
Rookie
 
Join Date: Aug 2010
Location: South Florida
Posts: 10
Default

Thanks for the info. I have a deep seat mounted and the front measurements are right on: 62cm on the left front and 63cm on the right. However, the measurement from the top of the axle to the top edge of the seat is only 19.5cm. The previous owner was running this kart on a 1.95 mile road course. Any suggestions for seat position and running this kart at PBIR?
mhershorn is offline   Reply With Quote
Old 11-18-2010, 03:16 PM   #4
mhershorn
Rookie
 
Join Date: Aug 2010
Location: South Florida
Posts: 10
Default

I ran the kart only 2 or 3 laps at PBIR last weekend. The clutch was smoking because the idle was too fast. Then the track was closing. I noticed there was not enough bite to the brakes. I had bled the brakes and there is a 1.5mm gap from pad to rotor. The bias front to back is equal. Any suggestions?
mhershorn is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:30 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2008 - MRP Motorsport - All rights reserved